Shenzhen Zhunyi Technology Co., LtdShenzhen Zhunyi Technology Co., Ltd

Shenzhen Zhunyi Technology Co., Ltd
Home >  News >  Blog > 

1.69inch Resolution 240*280 rectangle Interface MCU/RGB/SPI view direction full/IPS LCD display

2025-01-07

  This 1.69-inch rectangular LCD display has the following features:

  Size and Resolution: The screen size is 1.69 inches and the resolution is 240x280 pixels. This resolution is reasonable for a small screen and is suitable for displaying text and simple graphics.

  Shape: Rectangular display area, which is the most common and practical screen shape and is suitable for a variety of application scenarios.

  Interface Type:

  MCU (Microcontroller Unit): Usually refers to a parallel data transmission interface that can be directly connected to a microcontroller and is suitable for applications that require fast data exchange.

  RGB (Red, Green and Blue Primary Color Signal): Provides direct color control and enables high-quality image display, but requires more pins and processing power.

  SPI (Serial Peripheral Interface): A simple, low-cost serial communication protocol suitable for long-distance communication or when the number of available pins is limited.

  Viewing Angle Technology: The mention of "view direction full/IPS" indicates that the display uses wide viewing angle technology, probably an IPS (In-Plane Switching) panel. IPS panels are known for their wide viewing angles and excellent color reproduction, which means that the screen can maintain good color accuracy and contrast even when viewed from the side.

  This specification of display is very suitable for small embedded systems, handheld devices, portable instruments and other applications. Due to its small size and moderate resolution, it is particularly suitable for scenarios that require compact design and good visual experience, such as smart watches, fitness trackers, medical devices or personal electronic devices.

  The interface you choose depends on your specific needs and hardware platform. If your application requires high-definition display and has sufficient pin resources, then the RGB interface will be a good choice; if cost-effectiveness and ease of integration are more important, then the SPI interface may be more suitable. For occasions with high requirements for wide viewing angles and color accuracy, IPS panels are undoubtedly the best choice.

Previous:2.1inch Resolution 480*480 round Interface MCU/RGB/SPI view direction full/IPS LCD display Next:2.73inch Resolution 320*320 square Interface MCU/RGB/SPI/MIPI view direction full/IPS LCD display
LinkedIn LinkedIn

LinkedIn

LinkedIn
LinkedIn

wenxiaoli@zhunyikeji.com

LinkedIn
Shenzhen Zhunyi Technology Co., Ltd